MDCAT Aggregate Calculator

Work out your MBBS and BDS merit aggregate exactly the way the admitting universities do — Matric counts for 10%, FSc for 40% and the MDCAT for 50% — or switch to reverse mode and find out how many MDCAT marks you still need for the aggregate you are aiming at.

Calculate your aggregate

In short

Aggregate = (Matric ÷ total × 10) + (FSc ÷ total × 40) + (MDCAT ÷ 200 × 50). Every component is converted to weighted points out of 10, 40 and 50 respectively, and the three are added to give a score out of 100.

How the MDCAT aggregate works

The aggregate is the single merit score used to rank candidates for MBBS and BDS admissions in Pakistan. It follows the weightage set by the Pakistan Medical & Dental Council (PMDC): 10% for Matric, 40% for Intermediate and 50% for the MDCAT entry test. The important point is that these percentages are weights, not raw percentages. A student who scores 90% in Matric does not add 90 to the aggregate; they add 90% of the 10 points available for Matric, which is 9 points. In the same way, 90% in FSc adds 36 of the 40 available points, and 90% in the MDCAT adds 45 of the 50 available points.

This is why the FSc result matters so much more than Matric, and why the MDCAT matters most of all. Half of your entire merit is decided by one test, but the other half is already fixed before you sit it. Strong board marks give you a head start that a weaker MDCAT performance cannot easily erase, and weak board marks set a ceiling that even a perfect MDCAT score cannot break through — reverse mode above exists precisely to show you that ceiling honestly, before the test rather than after it.

After the MDCAT, merit lists are prepared by the admitting universities — bodies such as UHS in Punjab, KMU in Khyber Pakhtunkhwa and DUHS in Sindh — province-wise, and separately for different categories and quotas. Closing merits change every year, by province, category and quota. For that reason this page prints no fixed closing-merit figure: the only figure that counts is the official merit list published by your own admitting university for your category in the current cycle.

The formula

Matric points = (Matric marks obtained ÷ Matric total marks) × 10

FSc points = (FSc marks obtained ÷ FSc total marks) × 40

MDCAT points = (MDCAT marks obtained ÷ MDCAT total marks) × 50

Aggregate = Matric points + FSc points + MDCAT points, expressed as a percentage out of 100.

For reverse mode, the working runs backwards. Add your Matric and FSc points together, subtract that sum from your target aggregate, and the remainder is the number of points that must come from the MDCAT. Because the MDCAT carries 50 points in total, the marks needed are (remaining points ÷ 50) × MDCAT total, rounded up to the next whole mark — you cannot score a fraction of a mark, and rounding down would leave you just short of the target. If the remainder is more than 50 points, the target cannot be reached even with full MDCAT marks; if it is zero or negative, your board marks alone already pass the target.

One condition sits outside the arithmetic. An aggregate only matters if you are eligible in the first place: a candidate must also meet the minimum eligibility requirements for the year, including the minimum qualifying percentage PMDC sets for that year in the MDCAT. A high aggregate calculated from a score below that qualifying line will not convert into admission, so always check the current PMDC eligibility criteria alongside your aggregate.

Worked example — Mode A: calculating an aggregate

Take a student with Matric 950 out of 1100, FSc 950 out of 1100 and an MDCAT score of 180 out of 200.

Matric points: 950 ÷ 1100 × 10 = 8.6364, displayed as 8.64 points. FSc points: 950 ÷ 1100 × 40 = 34.5455, displayed as 34.55 points. MDCAT points: 180 ÷ 200 × 50 = 45.00 points. Adding them: 8.64 + 34.55 + 45.00 gives an aggregate of 88.18%. Notice how the FSc component, at exactly the same percentage as Matric, contributes four times as many points — that is the 40% weight against the 10% weight in action. Notice also that an MDCAT score of 90% contributes 45 points on its own, more than Matric and FSc combined in this example, which is why serious candidates protect their MDCAT preparation time so fiercely in the final months.

Worked example — Mode B: marks needed for 90%

Now take a student with Matric 950 out of 1100 and FSc 1000 out of 1100 who wants a target aggregate of 90%. The Matric component is again 8.64 points. The FSc component is 1000 ÷ 1100 × 40 = 36.36 points. Together the board results already provide 45.00 points. The student therefore needs 90 − 45.00 = 45.00 further points from the MDCAT. Converting points back into marks: 45.00 ÷ 50 × 200 = 180 marks out of 200. That is a demanding but reachable target — and knowing the exact number in advance lets the student judge, from practice-test scores, whether the goal is realistic.

Component reference

ComponentWeightMaximum pointsTypical total marks
Matric (SSC)10%10.001100 in most boards
Intermediate (FSc)40%40.001100 in most boards
MDCAT50%50.00200, national pattern
Aggregate100%100.00—

If your board uses a different total — some Matric schemes now run to 1200 marks — simply enter your actual total. The formula works on proportions, so any total gives correct weighted points.

How to use this calculator

  1. Choose Mode A to calculate an aggregate you already have the marks for, or Mode B to work backwards from a target.
  2. Enter your Matric obtained and total marks exactly as printed on your result card.
  3. Enter your FSc obtained and total marks. A-level students should enter their IBCC equivalent marks instead.
  4. For Mode A, add your MDCAT score out of 200. For Mode B, enter your target aggregate percentage instead.
  5. Press Calculate — or simply change any field, because the result updates as you type — and read each component's points as well as the total.
  6. In Mode B, compare the marks needed with your recent practice-test scores to judge whether the target is within reach.

Disclaimer: This calculator is for guidance only and uses the PMDC weightage described above. Eligibility rules, qualifying percentages and merit-list policies are set for each admission cycle by PMDC and the admitting universities and can change. Always confirm your standing against the official merit list of your admitting university.

Frequently asked questions

What is the MDCAT aggregate formula?

The PMDC weightage is Matric 10%, Intermediate (FSc) 40% and MDCAT 50%. Convert each result to its weighted points — Matric obtained divided by Matric total, multiplied by 10; FSc obtained divided by FSc total, multiplied by 40; MDCAT obtained divided by MDCAT total, multiplied by 50 — then add the three figures. The total, out of 100, is your aggregate percentage.

How many MDCAT marks do I need for a 90% aggregate?

It depends entirely on your Matric and FSc marks, because those two already contribute up to 50 of the 100 aggregate points. First work out your Matric and FSc points, subtract them from 90, and whatever remains must come from the MDCAT half. Divide the remaining points by 50 and multiply by 200 to get the marks required. Use reverse mode above to do this instantly for your own marks.

Does A-level or equivalence change the calculation?

The formula itself does not change. A-level and other foreign qualifications are first converted by IBCC equivalence into marks on the same Matric and Intermediate scales, and those equivalent marks are then fed into the same 10% and 40% components. Always enter the equivalent marks printed on your IBCC certificate, not your original grades.

Is 200 the MDCAT total everywhere in Pakistan?

Yes. The MDCAT follows a national paper pattern with a total of 200 marks, and in the current format there is no negative marking. Because the test is national, the same total applies whichever province you sit in, although merit lists are prepared separately by the admitting universities.

Can I improve my FSc marks later to raise my aggregate?

Many boards allow improvement or repeat examinations, but the rules, the number of subjects you may repeat and the deadlines vary by board and can change between sessions. Whether improved marks are accepted for a particular admission cycle also depends on the admitting university's policy for that year, so check both your board's improvement rules and the university prospectus before relying on an improvement attempt.

Why do two students with the same MDCAT marks have different aggregates?

Because the MDCAT is only half of the aggregate. The other half comes from Matric (10 points) and FSc (40 points), so a student with stronger board marks carries more points into the calculation before the MDCAT is even counted. Two identical MDCAT scores of 180 can therefore produce noticeably different aggregates once the board components are added.

Related tools